VAG CAN PRO component protection V5.5.1 VAG CAN PRO VIM replace VCDS Cable and ODIS 3.0.3 VAS 5054a Bluetooth

VAG CAN PRO component protection is china VAG CAN PRO professional cable clone version.VAG CAN PRO VIM can change the eeprom in mmi. OBD2Tuning.com VAG CAN PRO component protection V5.5.1 VAG CAN PRO VIM replace VCDS Cable and ODIS 3.0.3 VAS 5054a Bluetooth. 

VAG Can Pro Audi VW component protection removal tool VAG CAN PRO Clone V5.5.1



What’s VAG CAN PRO component protection from obd2tuning.com 

VAG CAN PRO VCP (VAG CAN Professional)supports CAN BUS + UDS + K-Line for diagnostics and programming of electronic components used in vehicles Volkswagen, Audi, Seat, Skoda, made from 1990 to 2015. VAG CAN Pro can completely replaced VAS 5054A ODIS Bluetooth. Is better that VCDS in all aspects. It can do some things that VCDS can’t, OCF will make your life much easier, it takes time to understand how this software works, it still need some fixes, it sometimes gives you headache but it’s definitely worth to buy as second software for VAG after VCDS. It is very good tool for VAG and DGS flash.

Software version 5.5.1

Support for new addresses entered in the MLB-Evo platform
Update database-ODX (support for all models 2015)

ODIS is OEM, so it fully supports every VAG model, but it’s slow and you need online connection for being able to do a lot of things.
VCDS is super fast, best to read DTC’s and do basic stuff and some coding, but it doesn’t work well with new MQB platform.

V5.5.1 VAG CAN PRO VIM is little bit a mix of those, reads DTC fast, every feature is done offline, and work very well with MQB.

Main features of VCP(VAG CAN Professional cable from obd2tuning.com):

* Unique features OCLF service procedures (One-Click-Function);
* inexpensive flasher for VAG;
* inexpensive flasher with support UDS controllers;
* ESP MK60EC1 decision coding blocks;
* a tool for a complete diagnosis MQB platform (Golf VII, Octavia III) Support to 01.2013;
* ZDC-loading containers in the electronic components;
* Unlock video in motion (VIM) on the MQB platform (Discover Pro and MMI-MQB);
* Coding controllers for PR-codes;
* “Login finder” – allows you to scan and logins in the CAN controllers UDS;
* Support for the new Polo in 2014 Facelift;
* Support for the new Passat B8;
* Full support of Audi TT-3 on the platform of the IBC;
* Full support for Skoda Fabia III

This article is compiled by www OBD2Tuning com, if you have any advice on it, pls feel free to contact OBD2Tuning - China OBD2 Tuning Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.