VCDS 16.8.3 German/French/English VAG COM 16.8.3 crack cable China VAGcom 16.8.3 interface
OBD2Tuning.com VCDS 16.8.3 VCDS cable Vag com 16.8.3 HEX-CAN USB Interface Support Germany/English/French, Crack VCDS 16.8.3 diagnose cable for Audi/VW/Seat/Skoda run on win10 operate system.
VCDS 16.8.3 German/French/English software Instructions from obd2tuning.com:
- Download the self-installing distribution file available below.
- Run it and follow the prompts to allow it to install itself.
- The installer will prompt you if you wish to see a PDF of installation instructions.
- You must install vag on your PC's hard disk!
It may not work properly if you try running it directly from other media.
However, you can use other media such as a CD or USB memory key to move the distribution file from a PC with internet access to another PC that does not have internet access.
- Connect an appropriate interface between the computer and the
- Turn the car's ignition switch ON. No need to start the
- Start the vag program:
Click [Options] and select the correct communications port.
Use [Test] to confirm that the program can use the port and find the interface.
Then [Save].
Now Play. Make sure the software can reliably access all the control modules that it should in your car.
OBD2Tuning.com Released 16.8.3 Notes:
1). Release 16.8.3 works with Windows XP, Vista, 7, 8, and 10 (both 32-bit and 64-bit)
Windows 2000 will probably still work, but we no longer consider it supported.
Windows running in a VM (Parallels, Virtual Box, etc) may work but is not supported.
Windows 95, 98, ME, and NT4 definitely will not work.
2). Release 16.8 must be used with a HEX-, KEY-, KII-, or Micro-CAN "high-tech" Interface.
3). It does not work with any third-party interfaces or some of our older "low-tech" interfaces.
4). If you're a registered user and have an older low-tech interface, you should consider our
5). If you're not ready for an interface upgrade, you'll have to use Vag-Lite instead.
6). It is essential NOT to install in the Program Files tree in on systems running Windows Vista or newer.
To remove other old versions:
- Versions prior to Release 704, simply delete the shortcuts from your Start menu and
- Desktop and delete the folder(s) where the program was installed..
- Release 704 and newer may be uninstalled using Windows' Add/Remove Programs or by running the
- uninstall.exe program found in the folder with the version that you wish to remove.
OBD2Tuning.com Focus on OBD Tool Since 2008
https://www.facebook.com/obd2tuning/
This article is compiled by www OBD2Tuning com, if you have any advice on it, pls feel free to contact OBD2Tuning - China OBD2 Tuning Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.
沒有留言:
張貼留言