ow GM MDI Interface with GM MDI 2 Release Date and gm mdi manager Be Used

GM MDI Interface is initially being introduced with Pass-Thru programming capabilities only. GM MDI 2 Release Data can be used to perform Pass-Thru programming on all vehicles built since 1996 and will support all vehicles into the future. Below OBD2Tuning sharing How GM MDI Interface with GM MDI 2 Release Date and gm mdi manager Be Used.

GM MDI Tech 3 GM Mutiple Diagnostic Interface GM MDI Manager

The obd2tuning.com GM MDI 2 Release Date will be required to perform diagnostics on selected NAO vehicles for model year 2009. Diagnostic software is scheduled to be released for the GM MDI during the fourth quarter of 2008.

Regulations require programming procedures to be compliant with SAE Recommended Practice J2534. The GM SPS is compliant with SAE Recommended Practice J2534, and the GM MDI is compliant with the portions of SAE J2534 that are applicable for GM vehicles.

What protocols does the GM MDI interface from obd2tuning.com support?

For immediate use — At present, vehicles have two buses on the 16 pin connector
(high speed and low speed GMLAN). The GM MDI communicates using all of the existing GM protocols, the same as the Tech 2:

– UART
– Class 2
– KWP2000
– GMLAN (CAN)
Beginning with the 2008 model year vehicles, Pass-Thru will be the only programming method available. (Remote will continue to be available for previous vehicles.)

Notice: Factory can provide account for online programming, if you need, you need to reserve in advance(as factory only have one account)

This article is compiled by www OBD2Tuning com, if you have any advice on it, pls 
feel free to contact OBD2Tuning - China OBD2 Tuning Tool Automotive Diagnostic 
Tools Car Key Programmer OBD2 ECU chip tuning tool Center.