2016年3月9日 星期三

Wifi GM MDI scanner With GM MDI 2 release date Manager SPS Programming Guide

Wifi GM MDI scanner is GM MDI Multiple Diagnostic Interface with wifi/wireless function. Wifi GM MDI scanner support programming with tech2win and gds2 software. Below OBD2Tuning sharing Wifi GM MDI scanner With GM MDI 2 release date Manager SPS Programming Guide.

Wifi GM mdi module GM tech 3 scanner with GM MDI wireless card

Wifi GM mdi module GM tech 3 scanner with GM MDI wireless card

Wifi GM MDI scanner With GM MDI 2 release date Manager SPS Programming Guide: 

Here are some steps technicians can take to assist in completing a successful programming event,  before programming a vehicle control module using the GM Service Programming System (SPS). While the service shop and network environments are different at each dealership, here are a few recommended best practices.

Setup/Configuration
Recommended setup and configuration:
• Place the Techline PC next to or inside the vehicle (if it’s a Techline laptop computer).
• A laptop computer should be plugged in to ensure the laptop battery will be maintained during the programming event.
• Connect the PC to the Internet/TIS2Web via a quality LAN cable or reliable Business Grade Wi-Fi access point.
• Connect the PC to the Multiple Diagnostic Interface (MDI) using the USB cable method.
• Connect a Midtronics® GR8 (Essential Tool EL-50313), set up in Power Supply Mode, or an approved Midtronics® PSC 550 Battery Maintainer (SPS Programming Support Tool EL-49642) or equivalent to maintain proper battery voltage during programming when required.
• To ensure the computer remains active, adjust the Microsoft Windows® “Power Options.” Select the “High performance” power plan and set it to “Never” sleep in either ‘On Battery’ or ‘Plugged In’ modes.

This article is compiled by www OBD2Tuning com, if you have any advice on it, pls feel free to contact OBD2Tuning - China OBD2 Tuning Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.

沒有留言:

張貼留言